Microsoft LAN Manager (version 2.1) with Windows for
Workgroups 3.11
1
Run the Intel Installation Program from Disk 1, Installation Disk.
2
Choose Microsoft Windows for Workgroups from the Select
Network Operating System screen.
3
Select "Yes" on the Attached to Network File Server screen.
4
Select Microsoft LAN Manager.
5
Follow the prompts to complete the Intel segment of the
installation.
6
Start Windows and, in the Network program group, double-click
on the Network Setup icon.
7
If you have not installed network support, choose Networks in the
Network Setup dialog box, select Install Microsoft Windows
Network, and click OK. Otherwise proceed with step 8.
8
In the Network Setup dialog box, choose Drivers.
9
In the Network Drivers dialog box, choose Add Adapter.
10 In the Add Network Adapter box, choose Unlisted or Updated
Network Adapter and click OK.
11 When prompted for an "unlisted, updated, or vendor-provided
network driver disk," insert the Intel Network Drivers Disk.
12 Select "Intel M16A NDIS 2.01 Real Mode," and click OK.
13 Close the Network Drivers dialog box and click OK in the
Network Setup box.
14 Complete the installation process, inserting the Intel Network
Drivers Disk if required.
15 Continue with the installation until it is completed.
16 Click on the Control Panel in the "Main" group.
17 Select Startup from the Control Panel.
18 In the Options for Enterprise Networking window click "Log on
to Windows NT or LAN Manager Domain."
19 Save, exit, and reboot the PC.
Software Installation
39