FTP Software LANWatch NDIS 2.0 Driver Installation
1
Run the Intel Installation Program from Disk 1, Installation Disk.
2
Choose FTP LANWatch from the Select Network Operating
System screen.
3
Follow the prompts to complete the Intel segment of the
installation.
4
Install LANWatch according to the instructions in your FTP
LANWatch manual.
5
Using a text editor, add the following lines to your CONFIG.SYS
file:
DEVICE = C:\NDIS\PROTMAN.SYS /I:C:\NDIS
DEVICE = C:\NDIS\M16ACFG.EXE
DEVICE = C:\NDIS\M16ANDIS.EXE
DEVICE = C:\NDIS\DIS_PKT.GUP
(Include the following line for LANWatch versions earlier than
3.0 only)
DEVICE = C:\LW\IFCUST.SYS
6
Create a directory called NDIS on your hard disk, by typing:
MD NDIS
7
At the DOS prompt, copy the files M16ACFG.EXE and
M16ANDIS.EXE from the C:\INTEL\M16A directory on your
hard disk and the file PROTOCOL.FTP from the \NDIS directory
on the Intel Network Drivers Disk to the \NDIS directory you
created in Step 6.
8
Use a text editor to modify the PROTOCOL.FTP file to match the
keywords and values in the sample PROTOCOL.INI file in the
\INTEL\M16A directory.
9
Copy all the files from the \NDIS directory on the FTP
Unsupported Software Disk A to the \NDIS directory created in
Step 6.
10 Reboot the PC.
11 Change to the \NDIS directory and run NETBIND.EXE.
12 Run LW.EXE.
Software Installation
27