Banyan Vines Version 6.0 - Intel EtherExpress PRO/100 User Manual

C H A P T E R 2

Banyan VINES version 6.0

NDIS 2.0 Driver
1 Run the Intel Installation Program from Disk 1, Installation Disk.
2 Choose Banyan VINES from the Select Network Operating
System screen.
3 Follow the prompts to complete the Intel segment of the
installation. Note the IRQ value set by the Intel Installation
Program for use in step 10 below. The Installation Program also
creates a \VINES directory on your hard disk.
4 Copy the files from the VINES Master disk into the VINES
directory.
5 Copy the NDIS driver files from \NDIS directory on the VINES
LAN Drivers Disk into the VINES directory.
6 Change to the VINES directory.
7 Type PCCONFIG and select Network Card Settings, followed by
NDIS Ethernet.
8 At the PROTOCOL.INI bindings prompt, type INTELNET.
9 Enter the IRQ value set by the Intel Installation Program (see step
3 above).
10 Press F10 to save and Esc to return to the main menu.
11 Select Login Environment Settings, followed by Default
Communications Driver, followed by NDIS Ethernet.
12 Press Esc to return to the Main Menu and press F10 to save.
13 Reboot the PC.
22