Configuring The Line Rate; Displaying And Maintaining Traffic Policing, Gts, And Line Rate - HP A5120 EI Series Configuration Manual

Configuring the line rate

Follow these steps to configure the line rate:
To do...
Enter system view
Enter
interface
view or port
group view
Configure the outbound
line rate for the interface
or port group
Displaying and maintaining traffic policing, GTS,
and line rate
NOTE:
On the A5120 EI switches, you can configure traffic policing in policy-based approach. For more
information about the displaying and maintaining commands, see the chapter "QoS configuration
approaches."
To do...
Display interface GTS
configuration information
Display interface line rate
configuration information
Use the command...
system-view
Enter
interface interface interface-type interface-number
view
Enter port
port-group manual port-group-name
group view
qos lr outbound cir committed-
information-rate [ cbs committed-burst-size
]
Use the command...
display qos gts interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display qos lr interface [ interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
Remarks
—
Use either command.
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Required
38
Remarks
Available in any
view
Available in any
view