Worksheet 3: Co Line - Toshiba STRATA CTX100 Installation And Maintenance Manual

Worksheet 3: CO Line

Main Location _______________
Item
Co Line Type Required
#
CO1 Analog Loop Start CO Lines with RCOU
Analog Loop Start CO Lines with RCOU/
CO2
RCOS
Analog Ground Start CO Lines with
CO3
RGLU
CO4 Caller ID Line interface with RCIU
CO5 Caller ID Line interface with RCIU/RCIS
CO6 BVPU VoIP Circuits
CO7 Analog Tie Lines with REMU
CO8 Analog DID Lines with RDDU
CO9 T1 Digital Lines with RDTU2
CO10 T1 Digital Lines with RDTU2
CO11 T1 Digital Lines with RDTU2
CO12 ISDN and/or QSIG with RPTU2
CO13 ISDN and/or QSIG with RPTU2
CO14 ISDN and/or QSIG with RPTU2
3
CO15 ISDN BRI Circuit , U-type with RBUU
1
ISDN BRI Circuits
CO16
RBUS
1
CO17 ISDN BRI Circuits
1
ISDN BRI Circuits
CO18
RBSS
E911 CAMA Circuits (RMCS/RCMS=2
CO19
circuits, add another RCMS for 4 circuits
CO20
Dealer-supplied NT-1 S/T BRI Line
CO21
Circuits
Dealer-supplied CSU for RPTU and/or
CO22
RDTU2
CO23 Cable kits for RPTU2
CO24 Cable Kits for RPTU2
Secondary Protectors For RDDU and
CO23
REMU
1. Round up fractions to the nearest whole number.
2. Maximum of five PCBs with CTX670 and two BVPU PCBs with CTX100 because of FCC Part 15 emissions requirement.
3. Each ISDN BRI circuit can be configured to provide two CO lines or interface to one BRI station. Each circuit uses 2 CO lines and
2 station ports of system capacity regardless of how it is configured (line or station).
Strata CTX I&M 10/02
Remote Location 1___ 2___ 3___ 4____5___ 6____
Line
Qty
2
, U-type with RBUU/
, S/T-type with RBSU
, S/T-type with RBSU/
Miscellaneous CO Line Equipment
Number of NT-1s
Number of CSUs
Number of RPRI-CBL-KIT
Number of RPRI-CBL-KIT
Number of Protectors.
PCB PCB
/X=
Qty Name
/4= RCOU 1 Slot/RCOU =
RCOU/
/8= 1 Slot/RCOU/RCOS =
RCOS
/4= RGLU 1 Slot/RGLU =
/4= RCIU 1 Slot/RCIU =
RCIU/
/8= 1 Slot/RCIU/IS =
RCIS
/4= BVPU 1 Slot/BVPU =
/4= REMU 1 Slot/REMU =
/4= RDDU 1 Slot/RDDU =
/24= RDTU2 2 Slots/RDTU2 =
/16= RDTU2 1 Slot/RDTU2 =
/8= RDTU2 1 Slots/RDTU2 =
/23 RPTU2 1 Slot/RPTU2 =
/16 RPTU2 1 Slot/RPTU2 =
/8 RPTU2 1 Slot/RPTU2 =
/2= RBUU 1 Slot/RBUU =
RBUU/
/4= 1 Slot/RBUU/US =
RBUS
/2= RBSU 1 Slot/RBSU =
RBSU/
/4= 1 Slot/RBSU/RBSS =
RBSS
RMCU/
/4= 1 Slot/RMCU/RMMS=
RCMS
Total Slots required for line PCBs
No slots required.
No slots required.
No slots required.
No slots required.
No slots required.
Strata CTX Configuration
Worksheet 3: CO Line
1
Slots Required
1-25