Station Call Forward Procedures - Toshiba IP5000 Series User Manual

IPedge
Feature Operations
Station Call Forward
Categories
Call Forward
Settings
Station Call Forward
Procedures
42
Check with your System Administrator to determine if
Important!
the system uses "Basic Survivability", if yes, do not
change your station call forward settings.
The following calls may be forwarded from a station:
• Internal calls
• Auto-attendant calls
• Outside lines that ring one station only
• Transferred internal or incoming line calls
Call Forward may be set for the following call categories, and there are five
different Call Forward Settings that may be assigned. (See
Settings" on Page -42). Call Forward destinations may be set to internal
destinations or an outside telephone number.
• Call Forward Any Call
Call Forward - Incoming Line
•
Call Forward Any Call - Set for Another Station
•
calls for another telephone within the system
Call Forward - Incoming Line Set for Another Station
•
forwarding of incoming line calls for another telephone within the system
Call Forward Any Call and Call Forward - Incoming Line may be set
Note:
simultaneously on a telephone. This allows incoming line calls to be
forwarded to a different destination than other call types.
Each Call Forward Setting has a different cancellation code.
Note:
5.
Call Forward All Calls
6.
Call Forward Busy/Do Not Disturb
extension is busy or set to Do Not Disturb (DND)
In "tone-first" systems with multiple lines, Call Forward Busy forwards
Note:
calls only when all lines are in use. In "voice-first" systems, Call
Forward Busy forwards all calls whenever the telephone is in use
7.
Call Forward - No Answer –
number of rings (preset individually for each station)
8.
Call Forward Busy/Do Not Disturb/No Answer –
when Busy, DND, or when call is unanswered after a set number of rings
9.
Call Forward Cancel
Call Forward functions are registered by entering the commands outlined
below, or by programming a Programmable Feature Button (FB) on the base
station.
To use the Call Forward button sequence:
Follow the instructions in
•
-43. Some features may require additional input:
TOSHIBA
– Forwards any call, internal or incoming line
– Forward incoming line calls only
– Forward all calls immediately
– Forward calls immediately when
Forward unanswered calls after a set
– Cancels the currently set Call Forward feature
"Example: Call Forward to extension"
"Call Forward
– Set forwarding of all
– Set
Forward all calls
on Page
IPedge UG 01/13