Configuring Management Ip Address - HP 1910 User Manual

Figure 25 System parameter configuration page
2. Configure the parameters as described in
Table 3 Configuration items
Item
Sysname
Syslocation
Syscontact

Configuring management IP address

CAUTION:
Modifying the management IP address used for the current login will terminate the connection to the
device. Use the new management IP address to re-log in to the system.
Description
Specify the system name.
The system name appears at the top of the navigation tree.
You can also set the system name in the System Name page you enter by selecting
Device > Basic. For more information, see
Specify the physical location of the system.
You can also set the physical location in the setup page you enter by selecting Device >
SNMP. For more information, see
Set the contact information for users to get in touch with the device vendor for help.
You can also set the contact information in the setup page you enter by selecting
Device > SNMP. For more information, see "Configuring SNMP."
38
Table 3.
"Configuring basic device
"Configuring SNMP."
settings"