HP 1910 User Manual page 439

Figure 410 Configuring the authorization method for the ISP domain
g. On the Accounting tab, select the ISP domain test, select the Default Accounting box, select
RADIUS from Default Accounting list, select system from the Name list to use it as the
accounting scheme, and click Apply.
The configuration progress dialog box appears.
h. After the configuration process is complete, click Close.
Figure 411 Configuring the accounting method for the ISP domain
5. Configure Layer 3 portal authentication:
a. Select Authentication > Portal from the navigation tree.
The portal server configuration page appears.
b. In the Portal Application: Layer 3 Interfaces area, click Add.
c. On the page that appears, select the interface Vlan-interface4, select Add for Portal Server to
add a portal server, select the Layer3 portal authentication mode, enter the portal server name
newpt, the portal server IP address 192.168.0.111, the shared key portal, the port number
50100, and the redirection URL http://192.168.0.111:8080/portal for portal authentication,
and click Apply.
426