HP 1910 User Manual page 240
Hp 1910 gigabit ethernet switch series
Hide thumbs
Also See for 1910:
- User manual (548 pages) ,
- Getting started manual (52 pages) ,
- Quickspecs (43 pages)
Table of Contents
Advertisement
a.
Enter link aggregation interface ID 1.
b.
Select the Static (LACP Disabled) option for the aggregate interface type.
c.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.
4.
Click Apply.
Figure 199 Creating static link aggregation group 1
Method 2: Create dynamic link aggregation group 1
1.
From the navigation tree, select Network > Link Aggregation.
2.
Click Create to enter the page as shown in
3.
Configure dynamic aggregation group 1:
a.
Enter link aggregation interface ID 1.
b.
Select the Dynamic (LACP Enabled) option for aggregate interface type.
c.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.
4.
Click Apply.
Figure
200.
227
Hide quick links:
Advertisement
Table of Contents
