Static Arp Configuration Example; Network Requirements; Configuring Switch A - HP 1910 User Manual

Item
Send gratuitous ARP packets when
receiving ARP requests from another
network segment

Static ARP configuration example

Network Requirements

As shown in
GigabitEthernet 1/0/1 in VLAN 100.
To ensure secure communications between Switch A and Router B, configure a static ARP entry on Switch
A for Router B.
Figure 234 Network diagram

Configuring Switch A

1. Create VLAN 100:
a. From the navigation tree, select Network > VLAN.
b. Click the Add tab.
c. Enter 100 for VLAN ID and click Create.
Figure 234, hosts are connected to Switch A, and Switch A is connected to Router B through
Description
Enable the device to send gratuitous ARP packets upon receiving ARP
requests from another network segment.
By default, the device does not send gratuitous ARP packets upon
receiving ARP requests from another network segment.
268