NOTE:
If you set operation parameters that a port does not support, you are notified of invalid settings and might
fail to set the supported operation parameters for the port or other ports.
Displaying port operation parameters
Displaying a specified operation parameter for all ports
1.
Select Device > Port Management from the navigation tree to enter the Summary page by default.
2.
Select the option for a parameter you want to view.
The parameter information for all the ports is displayed in the lower part of the page, as shown
in
Figure
Figure 62 The Summary tab
Displaying all the operation parameters for a port
1.
Select Device > Port Management from the navigation tree
2.
Click the Detail tab.
3.
Select a port whose operation parameters you want to view in the chassis front panel, as shown
in
Figure
62.
63.
80