Configuring And Displaying Clients' Ip-To-Mac Bindings - HP 1910 User Manual

Configuring and displaying clients' IP-to-MAC
bindings
1. Select Network > DHCP from the navigation tree to enter the DHCP Relay page shown in
289.
2. In the User Information area, click User Information to view static and dynamic bindings.
Figure 292 Displaying clients' IP-to-MAC bindings
3. Click Add to enter the page for creating a static IP-to-MAC
Figure 293 Creating a static IP-to-MAC binding
4. Configure the static IP-to-MAC binding as described in
5. Click Apply.
Table 97 Configuration items
Item
IP Address
MAC Address
Interface Name
Description
Enter the IP address of a DHCP client.
Enter the MAC address of the DHCP client.
Select the Layer 3 interface connected with the DHCP client.
IMPORTANT:
The interface of a static binding entry must be configured as a DHCP relay agent;
otherwise, address entry conflicts might occur.
326
binding.
Table 97.
Figure