Configuring Cross-Subnet Portal Authentication - HP 1910 User Manual

Figure 403 Applying the portal server to a Layer 3 interface

Configuring cross-subnet portal authentication

Network requirements
As shown in
Before passing portal authentication, the host can access only the portal server. After passing portal
authentication, the host can access Internet resources. Use the IMC server as the RADIUS server for user
authentication, authorization, and accounting.
Figure 404 Network diagram
20.20.20.1/24
Vlan-int2
8.8.8.1/24
Host
8.8.8.2/24
Figure 404, configure Switch A to perform cross-subnet portal authentication for users.
Switch A
Vlan-int2
192.168.0.100/24
Vlan-int4
Vlan-int4
20.20.20.2/24
Switch B
Portal server
192.168.0.111/24
RADIUS server
192.168.0.112/24
421