Telnet - HP 1910 User Manual

IP Method:
IP address:
Subnet mask:
Default gateway:
IPv6 Method:
IPv6 link-local address:
IPv6 subnet mask length:
IPv6 global address:
IPv6 subnet mask length:
IPv6 default gateway:
Current boot app is: flash:/1910-cmw520-f1510.bin
Next main boot app is: flash:/1910-cmw520-f1510.bin
Next backup boot app is: NULL
HP Comware Platform Software
Comware Software, Version 5.20,
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
HP 1910-8G-PoE+ (65W) Switch uptime is 0 week, 0 day, 2 hours, 1 minute
HP 1910-8G-PoE+ (65W) Switch
128M bytes DRAM
128M bytes Nand Flash Memory
Config Register points to Nand Flash
Hardware Version is REV.A
CPLD Version is 001
Bootrom Version is 156
[SubSlot 0] 8GE+1SFP+POE Hardware Version is REV.A

telnet

Syntax
telnet remote-host [ service-port ] [ source { interface interface-type interface-number | ip ip-address } ]
Parameters
remote-host: IPv4 address or host name of a remote host, a case insensitive string of 1 to 20 characters.
service-port: TCP port number of the Telnet service on the remote host. It is in the range of 0 to 65535.
The default is 23.
source: Specifies the source interface or source IPv4 address of Telnet packets.
interface interface-type interface-number: Specifies the source interface by its type and number. The
source IPv4 address of the Telnet packets that are sent is the IPv4 address of the specified source interface.
interface-type interface-number represents the interface type and number.
ip ip-address: Specifies the source IPv4 address of Telnet packets.
Description
Use telnet to telnet to a remote host.
Manual
10.153.96.86
255.255.255.0
Manual
FE80::2E0:FCFF:FE00:3621
10
2001::1
64
2001::2
33