Removing Arp Entries; Configuring Gratuitous Arp - HP 1910 User Manual

3. Configure the static ARP entry as described in
4. Click Apply.
Table 81 Configuration items
Item
IP Address
MAC Address
Advanced
Options

Removing ARP entries

1. From the navigation tree, select Network > ARP Management.
The ARP Table page appears, as shown in
2. Remove ARP entries:
To remove specific ARP entries, select the boxes of target ARP entries, and click Del Selected.
To remove all static and dynamic ARP entries, click Delete Static and Dynamic.
To remove all static ARP entries, click Delete Static.
To remove all dynamic ARP entries, click Delete Dynamic.

Configuring gratuitous ARP

1. From the navigation tree, select Network > ARP Management.
2. Click the Gratuitous ARP tab.
Figure 233 Gratuitous ARP configuration page
3. Configure gratuitous ARP as described in
Table 82 Configuration items
Item
Disable gratuitous ARP packets
learning function
Description
Enter an IP address for the static ARP entry.
Enter a MAC address for the static ARP entry.
Enter a VLAN ID and specify a port for the static ARP entry.
VLAN ID
IMPORTANT:
The VLAN ID must be the ID of the VLAN that has already been created, and the port
Port
must belong to the VLAN. The corresponding VLAN interface must have been created.
Table 81.
Figure 231.
Table 82.
Description
Disable learning of ARP entries from gratuitous ARP packets.
Gratuitous ARP packet learning is enabled by default.
267