2.
Choose an aggregate interface from the list.
The list on the lower part of the page displays the detailed information about the member ports of
the link aggregation group.
Figure 195 Displaying information of an aggregate interface
Table 66 Field description
Field
Aggregation interface
Link Type
Partner ID
Selected Ports
Standby Ports
Member Port
State
Reason for being Unselected
Description
Type and ID of the aggregate interface.
Bridge-Aggregation indicates a Layer 2 aggregate interface.
Type of the aggregate interface: static or dynamic.
ID of the remote device, including its LACP priority and MAC address.
Number of Selected ports in each link aggregation group (Only Selected ports
can send and receive user data).
Number of Unselected ports in each link aggregation group (Unselected ports
cannot send or receive user data).
A member port of the link aggregation group corresponding to the selected
aggregate interface.
Aggregation state of a member port: Selected or Unselected.
Reason why the state of a member port is Unselected. For a Selected port, this
field displays two hyphens (--).
223