Item
VLAN
ACL
User-profile
Configuring a user group
1.
Select Authentication > Users from the navigation tree.
2.
Click the User Group tab to display the existing user groups.
Figure 430 User group list
3.
Click Add.
The page for configuring a user group appears.
Figure 431 User group configuration page
4.
Configure the user group as described in
5.
Click Apply.
Description
Specify the VLAN to be authorized to the local user after the user passes authentication.
This option takes effect on only LAN and portal users.
Specify the ACL to be used by the NAS to restrict the access of the local user after the
user passes authentication.
This option takes effect on only LAN and portal users.
User profile for the local user. The switch series does not support this option.
447
Table
122.