Configuring Authorized Ip; Configuration Procedure - HP 1910 User Manual

Configuring authorized IP

The authorized IP function associates the HTTP or Telnet service with an ACL to filter the requests of clients.
Only the clients that pass the ACL filtering can access the device.

Configuration procedure

1. Select Security > Authorized IP from the navigation tree.
2. Click the Setup tab to enter the authorized IP configuration page.
Figure 453 Authorized IP configuration page
Configure
3.
4. Click Apply.
Table 128 Configuration items
Item
Telnet
Web
(HTTP)
authorized IP as described in Table
Description
Associate the Telnet service with an IPv4 ACL.
IPv4 ACL
You can configure the IPv4 ACL to be selected by selecting QoS > ACL IPv4.
Associate the Telnet service with an IPv6 ACL.
IPv6 ACL
You can configure the IPv6 ACL to be selected by selecting QoS > ACL IPv6.
Associate the HTTP service with an IPv4 ACL.
IPv4 ACL
You can configure the IPv4 ACL to be selected by selecting QoS > ACL IPv4.
128.
469