Displaying Mld Snooping Multicast Forwarding Entries - HP 1910 User Manual

Item
Fast Leave

Displaying MLD snooping multicast forwarding entries

1. Select Network > MLD snooping from the navigation tree.
2. Click Show Entries to display information about MLD snooping multicast forwarding entries.
Figure 259 Displaying entry information
3. To view detailed information about an entry, click the
Figure 260 Displaying detailed information about the entry
Table 89 Field description
Field
VLAN ID
Source Address
Description
Enable or disable fast-leave processing on the port.
When a port that is enabled with the MLD snooping fast-leave processing feature receives
an MLD done message, the switch immediately deletes that port from the IPv6 forwarding
table entry for the IPv6 multicast group specified in the message. When the switch receives
MLD multicast-address-specific queries for that multicast group, it does not forward them to
that port.
On a port that has only one host attached, you can enable fast-leave processing to save
bandwidth and resources. However, on a port that has multiple hosts attached, do not
enable fast-leave processing if you have enabled dropping unknown IPv6 multicast data
for the VLAN to which the port or the switch belongs. Otherwise, if a host on the port
leaves an IPv6 multicast group, the other hosts attached to the port in the same IPv6
multicast group cannot receive the IPv6 multicast data for the group.
Description
ID of the VLAN to which the entry belongs.
Multicast source address. If no IPv6 multicast sources are specified, this field
displays a double colon (::).
icon for the entry.
295