Dhcp Relay Agent Configuration Example; Network Requirements; Configuring Switch A - HP 1910 User Manual

DHCP relay agent configuration example

Network requirements

As shown in
where DHCP clients reside. VLAN-interface 2 is connected to the DHCP server whose IP address is
10.1.1.1/24.
The switch forwards messages between DHCP clients and the DHCP server.
Figure 294 Network diagram
DHCP client
DHCP client

Configuring Switch A

1. Enable DHCP:
a. Select Network > DHCP from the navigation tree to enter the DHCP Relay page.
b. Select the Enable option next to DHCP Service.
c. Click Apply.
Figure 294, VLAN-interface 1 on the DHCP relay agent (Switch A) connects to the network
DHCP client
Vlan-int1
10.10.1.1/24
Switch A
DHCP relay agent
DHCP client
Vlan-int2
10.1.1.2/24
DHCP server
327