Creating Vlans - HP 1910 User Manual

Step
2. Configuring the link type of a port
3. Setting the PVID for a port
4. Configure the hybrid port as an untagged
member of the specified
a. Selecting VLANs
Specify the range of VLANs available for
selection during related operations. Configure
a subset of all existing VLANs. This step is
required before you perform operations on the
Detail, Modify VLAN, and Modify Port tabs.
b. Modifying a VLAN
Configure the hybrid port as an untagged
member of the specified VLAN.
5. Modifying ports
6. Configure the hybrid port as a tagged member of
the specified VLAN
a. Selecting VLANs
Specify the range of VLANs available for
selection during related operations. Configure
a subset of all existing VLANs. This step is
required before you perform operations on the
Detail, Modify VLAN, and Modify Port tabs.
b. Modifying a VLAN
Configure the hybrid port as a tagged
member of the specified VLAN.
7. Modifying ports

Creating VLANs

1. Select Network > VLAN from the navigation tree.
2. Click Create to enter the page for creating VLANs.
3. Enter the VLAN IDs, a VLAN ID range, or both.
4. Click Create.
VLANs
151
Remarks
Optional.
Configure the link type of the port as hybrid.
If you configure multiple untagged VLANs for a trunk
port at the same time, the trunk port automatically
becomes a hybrid port.
By default, the link type of a port is access.
Optional.
Configure the PVID of the hybrid port.
By default, the PVID of a hybrid port is VLAN 1.
N/A
Configure the
untagged VLAN of the
hybrid port.
N/A
Configure the tagged
VLAN of the hybrid
port.
Required.
A hybrid port can have
multiple untagged VLANs.
Repeat these steps to
configure multiple
untagged VLANs for a
hybrid port.
By default, the untagged
VLAN of a hybrid port is
VLAN 1.
Required.
A hybrid port can have
multiple tagged VLANs.
You can repeat these steps
to configure multiple
tagged VLANs for the
hybrid port.