Figure 279 Configuring a default route
Verifying the configuration
1.
Display the routing table.
Enter the IPv6 route page of Switch A, Switch B, and Switch C respectively to verify that the newly
configured static routes are displayed as active routes on the page.
2.
Ping Host C from Switch A:
<SwitchA> system-view
[SwitchA] ping ipv6 3::2
PING 3::2 : 56
Reply from 3::2
bytes=56 Sequence=1 hop limit=254
Reply from 3::2
bytes=56 Sequence=2 hop limit=254
Reply from 3::2
bytes=56 Sequence=3 hop limit=254
Reply from 3::2
bytes=56 Sequence=4 hop limit=254
Reply from 3::2
bytes=56 Sequence=5 hop limit=254
--- 3::2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
data bytes, press CTRL_C to break
313
time = 63 ms
time = 62 ms
time = 62 ms
time = 63 ms
time = 63 ms