Adding An Ipv6 Acl - HP 1910 User Manual

Item
Action
MAC
Address
Filter
COS(802.1p priority)
Type Filter
Time Range

Adding an IPv6 ACL

1. Select QoS > ACL IPv6 from the navigation tree.
2. Click the Create tab.
The IPv6 ACL configuration page
Figure 467 Adding an IPv6 ACL
3. Add an IPv6 ACL.
4. Click Apply.
Source MAC Address
Source Mask
Destination MAC
Address
Destination Mask
LSAP Type
LSAP Mask
Protocol Type
Protocol Mask
Description
Select the action to be performed for packets matching the rule.
•
Permit—Allows matched packets to pass.
•
Deny—Drops matched packets.
Select the Source MAC Address box and enter a source MAC
address and a mask.
Select the Destination MAC Address box and enter a destination
MAC address and a mask.
Specify the 802.1p priority for the rule.
Select the LSAP Type box and specify the DSAP and SSAP fields in
the LLC encapsulation by configuring the following items:
•
LSAP Type—Frame encapsulation format.
•
LSAP Mask—LSAP mask.
Select the Protocol Type box and specify the link layer protocol type
by configuring the following items:
•
Protocol Type—Frame type. It corresponds to the type-code field
of Ethernet_II and Ethernet_SNAP frames.
•
Protocol Mask—Protocol mask.
Select the time range during which the rule takes effect.
appears.
486