HP 1910 User Manual page 455

Figure 425 Configuration progress dialog box
# Configure the authorization method for the ISP domain.
a. Select Authentication > AAA from the navigation tree, and then click the Authorization tab.
b. Configure the following parameters, as shown in
Select the domain name test.
Select the Default AuthZ box and then select RADIUS as the authorization mode.
Select system from the Name list to use it as the authorization scheme.
c. Click Apply.
A configuration progress dialog box appears.
d. After the configuration process is complete, click Close.
Figure 426 Configuring the authorization method for the ISP domain
# Configure the accounting method for the ISP domain.
a. Select Authentication > AAA from the navigation tree, and then click the Accounting tab.
b. Configure the following parameters, as shown in
Select the domain name test.
Select the Accounting Optional box and then select Enable.
Select the Default Accounting box and then select RADIUS as the accounting mode.
Figure 426.
Figure 427.
442