Configuring An Event Entry - HP 1910 User Manual

Configuring an event entry

1. Select Device > RMON from the navigation tree.
2. Click the Event tab.
Figure 90 Event tab
3. Click Add.
Figure 91 Adding an event entry
4. Configure an event entry as described in
5. Click Apply.
Table 26 Configuration items
Item
Description
Owner
Event Type
Table
Description
Set the description for the event.
Set the owner of the entry.
Set the actions that the system will take when the event is triggered:
•
Log—The system will log the event.
•
Trap—The system will send a trap in the community name of null.
If both Log and Trap are selected, the system will log the event and send a trap. If
none of them is selected, the system will take no action.
111
26.