HP 1910 User Manual page 144

3. Click Add.
The Add SNMP Group page appears.
Figure 115 Creating an SNMP group
4. Configure SNMP group as described in
5. Click Apply.
Table 36 Configuration items
Item Description
Group Name Set the SNMP group name.
Select the security level for the SNMP group:
•
•
Security Level
•
For an existing SNMP group, its security level cannot be modified.
Read View Select the read view of the SNMP group.
Select the write view of the SNMP group.
Write View
If no write view is configured, the NMS cannot perform the write operations to all MIB
objects on the device.
Select the notify view (the view that can send trap messages) of the SNMP group.
Notify View
If no notify view is configured, the agent does not send traps to the NMS.
Associate a basic ACL with the group to restrict the source IP address of SNMP packets.
ACL To restrict the intercommunication between the NMS and the agent, you can allow or
prohibit SNMP packets with a specific source IP address.
Table
NoAuth/NoPriv—No authentication no privacy.
Auth/NoPriv—Authentication without privacy.
Auth/Priv—Authentication and privacy.
IMPORTANT:
131
36.