Configuration Procedures; Creating A Link Aggregation Group - HP 1910 User Manual

Configuration procedures

Configuring a static aggregation group
Step
1.

Creating a link aggregation group

2. (Optional.)
interface
Configuring a dynamic aggregation group
Step
1. Creating a link
aggregation group
2. (Optional.)
aggregate interface
3. (Optional.)
LACP priority
4. (Optional.)
LACP-enabled port
Creating a link aggregation group
1. From the navigation tree, select Network > Link Aggregation.
2. Click Create to enter the page as shown in
Displaying aggregate
Remarks
Create a dynamic aggregate interface and configure member ports for the
dynamic aggregation group automatically created. LACP is enabled
automatically on all the member ports.
By default, no link aggregation group exists.
Displaying
Display detailed information of an existing aggregation group.
Set LACP priority for the local system and link aggregation member ports.
Setting
Changes of LACP priorities affect the aggregation state of the member ports.
The default port LACP priority and system LACP priority are both 32768.
Displaying
Display detailed information of LACP-enabled ports and the corresponding
remote (partner) ports.
Remarks
Create a static aggregate interface and configure member
ports for the static aggregation group.
By default, no link aggregation group exists.
Display detailed information of an existing aggregation
group.
Figure 194.
221