Creating A Static Arp Entry; Removing Arp Entries - HP 1920 Gigabit Ethernet Switch Series User Manual

Creating a static ARP entry

1. From the navigation tree, select Network > ARP Management.
The default ARP Table page appears, as shown in
2. Click Add.
The New Static ARP Entry page appears.
Figure 219 Add a static ARP entry
Configure the static ARP entry as described in
3.
4. Click Apply.
Table 80 Configuration items
Item
IP Address
MAC Address
Advanced
Options

Removing ARP entries

1. From the navigation tree, select Network > ARP Management.
The default ARP Table page appears, as shown in
2. Remove ARP entries:
To remove specific ARP entries, select the boxes of target ARP entries, and click Del Selected.
To remove all static and dynamic ARP entries, click Delete Static and Dynamic.
To remove all static ARP entries, click Delete Static.
To remove all dynamic ARP entries, click Delete Dynamic.
Description
Enter an IP address for the static ARP entry.
Enter a MAC address for the static ARP entry.
VLAN ID Enter a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
Port
The VLAN ID must be the ID of the VLAN that has already been created, and the port
must belong to the VLAN. The corresponding VLAN interface must have been created.
Figure 218.
Table 80.
Figure 218.
245