Creating a static ARP entry
Select Network ARP Management from the navigation tree to enter the default ARP Table page shown in
a. Click Add to enter the New Static ARP Entry page. Select the Advanced Options checkbox to expand
advanced configuration items, as shown in a.
Add a static ARP entry
a.
2
describes the static ARP entry configuration items.
Static ARP entry configuration items
2.
Item
IP Address
MAC Address
Advanced
Options
Static ARP configuration example
Network requirements
As shown in a, hosts are connected to Switch A, which is connected to Router B through interface
GigabitEthernet 1/0/1 belonging to VLAN 100. The IP address of Router B is 192.168.1.1/24. The MAC
address of Router B is 00e0-fc01-0000.
To enhance communication security between Switch A and Router B, static ARP entries need to be
configured on Switch A.
Description
Type an IP address for the static ARP entry.
Type a MAC address for the static ARP entry.
Type a VLAN ID and specify a port for the static ARP entry.
VLAN ID
IMPORTANT:
The VLAN ID must be the ID of the VLAN that has already been created, and the port
Port
must belong to the VLAN. The corresponding VLAN interface must have been created.
309