Clean Carriage Underside - Oce Arizona 250 GT User Manual

Clean Carriage Underside

Introduction
To maintain optimal print quality, it is important to periodically clean the underside
of the carriage to remove any excess ink. If the buildup of ink is excessive, it can be
transferred to media and thus reduce print quality.
When to do
At the end of each week, or as needed, clean any ink that has accumulated on the
underside of the carriage.
Before you begin
Make sure the carriage is in the parked position. The carriage and gantry
automatically return to this position after an image is printed.
It is not necessary to turn off the UV lamps as they are shuttered. However, they will
be hot if they are on so avoid touching them.
Required tool
Cloth-Poly Wipe 10cmX10cm
Note: Safety glasses and nitrile gloves must be worn when you handle ink.
Caution: The underside of the UV lamps may be hot, avoid touching them.
Clean Carriage Underside
111