Configuring Authentication-Method Lists - Dell PowerConnect B-RX Configuration Manual

TABLE 39
Field
Radius key
Radius retries
Radius timeout
Radius dead-time
Radius Server
connection
The show web command displays the privilege level of Web management interface users.
BigIron RX(config)# show web
User
set
Syntax: show web

Configuring authentication-method lists

To implement one or more authentication methods for securing access to the device, you configure
authentication-method lists that set the order in which the authentication methods are consulted.
In an authentication-method list, you specify the access method (Telnet, Web, SNMP, and so on)
and the order in which the device tries one or more of the following authentication methods:
•
•
•
•
•
•
NOTE
The TACACS and TACACS+, RADIUS, and Telnet login password authentication methods are not
supported for SNMP access.
BigIron RX Series Configuration Guide
53-1001986-01
Output of the show aaa command for RADIUS
Description
The setting configured with the radius-server key command. At the Super User privilege
level, the actual text of the key is displayed. At the other privilege levels, a string of periods
(....) is displayed instead of the text.
The setting configured with the radius-server retransmit command.
The setting configured with the radius-server timeout command.
The setting configured with the radius-server dead-time command.
For each RADIUS server, the IP address, and the following statistics are displayed:
Auth PortRADIUS authentication port number (default 1645)
Acct PortRADIUS accounting port number (default 1646)
opensNumber of times the port was opened for communication with the server
closesNumber of times the port was closed normally
timeoutsNumber of times port was closed due to a timeout
errorsNumber of times an error occurred while opening the port
packets inNumber of packets received from the server
packets outNumber of packets sent to the server
The current connection status. This can be "no connection" or "connection active".
Local Telnet login password
Local password for the Super User privilege level
Local user accounts configured on the device
Database on a TACACS or TACACS+ server
Database on a RADIUS server
No authentication
Configuring authentication-method lists
Privilege IP address
0 192.168.1.234
4
113