Dell PowerConnect B-RX Configuration Manual page 171

BigIron RX# show aaa
Tacacs+ key: brocade
Tacacs+ retries: 1
Tacacs+ timeout: 15 seconds
Tacacs+ dead-time: 3 minutes
Tacacs+ Server: 207.95.6.90 Port:49:
no connection
Radius key: networks
Radius retries: 3
Radius timeout: 3 seconds
Radius dead-time: 3 minutes
Radius Server:
no connection
Syntax: show aaa
The following table describes the TACACS and TACACS+ information displayed by the show aaa
command.
TABLE 37
Field
Tacacs+ key
Tacacs+ retries
Tacacs+ timeout
Tacacs+ dead-time
Tacacs+ Server
connection
The show web command displays the privilege level of Web Management Interface users.
BigIron RX(config)#show web
User
set
Syntax: show web
BigIron RX Series Configuration Guide
53-1001986-01
opens=6 closes=3 timeouts=3 errors=0
packets in=4 packets out=4
207.95.6.90 Auth Port=1645 Acct Port=1646:
opens=2 closes=1 timeouts=1 errors=0
packets in=1 packets out=4
Output of the show aaa command for TACACS and TACACS+
Description
The setting configured with the tacacs-server key command. At the Super User
privilege level, the actual text of the key is displayed. At the other privilege levels, a
string of periods (....) is displayed instead of the text.
The setting configured with the tacacs-server retransmit command.
The setting configured with the tacacs-server timeout command.
The setting configured with the tacacs-server dead-time command.
For each TACACS and TACACS+ server, the IP address, port, and the following statistics
are displayed:
opensNumber of times the port was opened for communication with the server
closesNumber of times the port was closed normally
timeoutsNumber of times port was closed due to a timeout
errorsNumber of times an error occurred while opening the port
packets inNumber of packets received from the server
packets outNumber of packets sent to the server
The current connection status. This can be "no connection" or "connection active".
Configuring TACACS and TACACS+ security
Privilege IP address
0 192.168.1.234
4
99