Choosing a Location for the SRX5308
The SRX5308 is suitable for use in an office environment where it can be free-standing (on its
runner feet) or mounted into a standard 19-inch equipment rack. Alternatively, you can rack-mount
the SRX5308 in a wiring closet or equipment room. A rack-mounting kit, containing two
mounting brackets and four screws, is provided in the package.
Consider the following when deciding where to position the SRX5308:
•
The unit is accessible and cables can be connected easily.
•
Cabling is away from sources of electrical noise. These include lift shafts, microwave ovens,
and air-conditioning units.
•
Water or moisture cannot enter the case of the unit.
•
Airflow around the unit and through the vents in the side of the case is not restricted. Provide a
minimum of 25 mm or 1 inch clearance.
•
The air is as free of dust as possible.
•
Temperature operating limits are not likely to be exceeded. Install the unit in a clean, air-
conditioned environment. For information about the recommended operating temperatures for
the SRX5308, see
Using the Rack-Mounting Kit
Use the mounting kit for the SRX5308 to install the appliance in a rack. Attach the mounting
brackets using the hardware that is supplied with the mounting kit.
Figure 1-4
Before mounting the SRX5308 in a rack, verify that:
•
You have the correct screws (supplied with the installation kit).
•
The rack onto which you will mount the SRX5308 is suitably located.
Introduction
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Appendix A, "Default Settings and Technical
v1.0, April 2010
Specifications."
1-11