Bottom Panel With Product Label; Choose A Location For The Vpn Firewall - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
• Factory Defaults reset button. To reset the VPN firewall to factory default settings, use
a sharp object to press and hold this button for about eight seconds until the front panel
Test LED blinks. All configuration settings are lost and the default password is restored.
• AC power receptacle. (12V, 1.5A).

Bottom Panel with Product Label

The product label on the bottom of the VPN firewall's enclosure displays factory default
settings, regulatory compliance, and other information.
Dual WAN Gigabit SSL VPN Firewall FVS336G v3
This device complies with part 15 of the FCC Rules and Canada ICES-003. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
CAN ICES-3 (A)/NMB-3(A)
KCC-NGR-FVS336Gv3 (A)
Input Rating: DC 12V 1.5A
MAC
(internet-1)
MAC
(local)
Figure 3. Product label on the bottom panel

Choose a Location for the VPN Firewall

The VPN firewall is suitable for use in an office environment where it can be freestanding (on
its runner feet) or mounted into a standard 19-inch equipment rack. Alternatively, you can
rack-mount the VPN firewall in a wiring closet or equipment room.
Consider the following when deciding where to position the VPN firewall:
• The unit is accessible, and cables can be connected easily.
• Cabling is away from sources of electrical noise. These include lift shafts, microwave
ovens, and air-conditioning units.
• Water or moisture cannot enter the case of the unit.
• Airflow around the unit and through the vents in the side of the case is not restricted.
Provide a minimum of 25 mm or 1-inch clearance.
• The air is as free of dust as possible.
• Temperature operating limits are not likely to be exceeded. Install the unit in a clean,
air-conditioned environment. For information about the recommended operating
temperatures for the VPN firewall, see
Specifications.
DEFAULT ACCESS
https://192.168.1.1
user name: admin
password: password
MAC
(internet-2)
SERIAL
Made in China
Get an Overview of the Features and Hardware and Log In
272-11992-03
Appendix D, Default Settings and Technical
21