Choosing A Location For The Stm - NETGEAR STM150 - ProSecure Web And Email Threat Management Appliance Reference Manual

ProSecure Web/Email Security Threat Management (STM) Appliance
STM600 Product Label
Figure 9.

Choosing a Location for the STM

The STM is suitable for use in an office environment where it can be freestanding (on its
runner feet) or mounted into a standard 19-inch equipment rack. Alternatively, you can
rack-mount the STM in a wiring closet or equipment room. A mounting kit, containing two
mounting brackets and four screws, is provided in the STM package.
Consider the following when deciding where to position the STM:
• The unit is accessible and cables can be connected easily.
• Cabling is away from sources of electrical noise. These include lift shafts, microwave
ovens, and air-conditioning units.
• Water or moisture cannot enter the case of the unit.
• Airflow around the unit and through the vents in the side of the case is not restricted.
Provide a minimum of 25 mm or 1 inch clearance.
• The air is as free of dust as possible.
• Temperature operating limits are not likely to be exceeded. Install the unit in a clean,
air-conditioned environment. For information about the recommended operating
temperatures for the STM, see
Specifications.
Appendix B, Default Settings and Technical
Chapter 1. Introduction | 23