NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 106

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
2. Click one of the following table buttons:
• Disable. Disables the rule or rules. The "!" status icon changes from a green circle to a
gray circle, indicating that the selected rule or rules are disabled. (By default, when a rule
is added to the table, it is automatically enabled.)
• Delete. Deletes the selected rule or rules.
DMZ WAN Outbound Services Rules
You can change the default outbound policy or define rules that specify exceptions to the default
outbound policy. By adding custom rules, you can block or allow access based on the service or
application, source or destination IP addresses, and time of day. An outbound rule can block or
allow traffic between the DMZ and any external WAN IP address according to the schedule
created in the Schedule screen.
To create a new outbound DMZ WAN service rule:
1. In the DMZ WAN Rules screen, click the Add table button under the Outbound Services table.
The Add DMZ WAN Outbound Service screen displays
Figure 4-6
2. Enter the settings as explained in
4-16
Table 4-2 on page 4-4.
v1.0, April 2010
(Figure 4-6 shows an example).
Firewall Protection