NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 266

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Table 8-1. Remote Management Settings
Setting
Secure HTTP Management
Allow Secure HTTP Management?
Note: The IP address and port
number to connect to the VPN
firewall are shown in this section of
the screen.
Telnet Management
3. Click Apply to save your changes.
Warning: If you are remotely connected to the VPN firewall and you select the
When remote management is enabled, you must use an SSL connection to access the VPN firewall
from the Internet. You must enter https:// (not http://) and type the VPN firewall's WAN IP address
in your browser. For example, if the VPN firewall's WAN IP address is 172.16.0.123, type the
following in your browser: https://172.16.0.123.
The VPN firewall's remote login URL is:
https://<IP_address> or https://<FullyQualifiedDomainName>
8-12
Description (or Subfield and Description)
Select the Yes radio button to enable HTTPS remote
management (which is the default setting) and specify the IP
address settings and port number settings. Select the No radio
button to disable HTTPS remote management.
Select one of the following IP address settings:
• Everyone. Allow access from any IP address on the Internet.
• IP address range. Allow access from a range of IP addresses
on the Internet. Enter a beginning and ending IP address to
define the allowed range.
• Only this PC. Allow access from a single IP address on the
Internet. Enter a single IP address.
Port Number
Select the Yes radio button to enable Telnet remote management
and specify the IP address settings. Select the No radio button to
disable HTTPS remote management (which is the default setting).
Select one of the following IP address settings:
• Everyone. Allow access from any IP address on the Internet.
• IP address range. Allow access from a range of IP addresses
on the Internet. Enter a beginning and ending IP address to
define the allowed range.
• Only this PC. Allow access from a single IP address on the
Internet. Enter a single IP address.
No radio button to disable HTTP remote management, you and all
other SSL VPN users are disconnected when you click Apply.
v1.0, April 2010
The default HTTPS port is 443. As an option,
you can change the port number.
Network and System Management