NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 214

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Figure 6-4
3. Select the check box and complete the fields as explained
Table 6-3.
Client IP Address Range
Item
Client IP Address Range
Enable Full Tunnel Support
DNS Suffix
Primary DNS Server
6-12
Settings
Description (or Subfield and Description)
Select this check box to enable full tunnel support. If you leave this check
box cleared (which is the default setting), split tunnel support is enabled,
and you must add client routes (see
Clients" on page 6-13).
Note: When full tunnel support is enabled, client routes are not operable.
A DNS suffix to be appended to incomplete DNS search strings. This is
optional.
The IP address of the primary DNS server that is assigned to the VPN
tunnel clients. This is optional.
Note: If you do not assign a DNS server, the DNS settings remain
unchanged in the VPN client after a VPN tunnel has been established.
Virtual Private Networking Using SSL Connections
v1.0, April 2010
Table 6-3.
"Adding Routes for VPN Tunnel