NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 317

Default Settings and Technical Specifications
You can use the reset button located on the rear panel to reset all settings to their factory defaults.
This is called a hard reset (for more information, see
page 8-19).
• To perform a hard reset, press and hold the reset button for approximately 8 seconds (until the
Test LED blinks rapidly). The VPN firewall returns to the factory configuration settings that
are shown in Table
• Pressing the reset button for a shorter period of time simply causes the VPN firewall to reboot.
Table A-1 shows the default configuration settings for the VPN firewall.
Table A-1. VPN Firewall Default Configuration Settings
Feature
Router Login
User login URL
Administrator user name (case-sensitive)
Administrator login password (case-sensitive)
Guest user name (case-sensitive)
Guest login password (case-sensitive)
Internet Connection
WAN MAC address
WAN MTU size
Port speed
Local Network (LAN)
LAN IP address
Subnet mask
RIP direction
RIP version
A-1.
v1.0, April 2010
"Reverting to Factory Default Settings" on
Default Behavior
https://192.168.1.1
admin
password
guest
password
Use default address
1500
10/100/1000 AutoSense
192.168.1.1
255.255.255.0
None
Disabled
Appendix A
A-1