Configuring Multi-Home Lan Ip Addresses On The Default Vlan - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
2. Select the Advanced option arrow at the top right of the LAN Setup screen. The LAN
Advanced screen displays.
Figure 3-4
3. From the MAC Address for VLANs drop-down list, select Unique. (The default is Same.)
4. As an option, you can disable the broadcast of ARP packets for the default VLAN by clearing
the Enable ARP Broadcast check box. (The broadcast of ARP packets is enabled by default
for the default VLAN.)
5. Click Apply to save your settings.
Note: If you attempt to configure more than 16 VLANs while the MAC address for
VLANs is set to Unique on the LAN Advanced screen, the MAC addresses that are
assigned to each VLAN might no longer be distinct.
Configuring Multi-Home LAN IP Addresses on the Default
VLAN
If you have computers using different IP networks in the LAN (for example, 172.16.2.0 or
10.0.0.0), you can add aliases to the LAN ports and give computers on those networks access to
the Internet, but you can do so only for the default VLAN. The IP addresses that are assigned as
secondary IP addresses must be unique and must not be assigned to the VLAN.
3-12
v1.0, April 2010
LAN Configuration