Setting Dmz Wan Rules - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Figure 4-4
2. Enter the settings as explained in Table 4-3 on page 4-8.
3. Click Apply to save your changes. The new rule is now added to the Inbound Services table.

Setting DMZ WAN Rules

The firewall rules for traffic between the DMZ and the Internet are configured on the DMZ WAN
Rules screen. The default outbound policy is to allow all traffic from and to the Internet to pass
through. You can then apply firewall rules to block specific types of traffic from either going out
from the DMZ to the Internet (outbound) or coming in from the Internet to the DMZ (inbound).
There is no drop-down list that lets you set the default outbound policy as there is on the LAN
WAN Rules screen. You can change the default outbound policy by blocking all outbound traffic
and then enabling only specific services to pass through the VPN firewall. You do so by adding
outbound services rules (see "DMZ WAN Outbound Services Rules" on page 4-16).
4-14 Firewall Protection
v1.0, April 2010