Accessing The Ssl Portal Login Screen - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

4. Click Apply to save your settings. The policy is added to the List of SSL VPN Policies table
on the Policies screen. The new policy goes into effect immediately.
Note: If you have configured SSL VPN user policies, ensure that HTTPS remote
management is enabled (see
page 8-10). If HTTPS remote management is not enabled, all SSL VPN user
connections are disabled.

Accessing the SSL Portal Login Screen

All screens that you can access from the SSL VPN menu of the Web Management Interface
display a user portal link at the right upper corner, above the menu bars (
When you click the user portal link, the SSL VPN default portal opens (see
6-24). This user portal is not the same as the new SSL portal login screen that you defined in
"Creating the Portal Layout" on page
To open the new SSL portal login screen:
1. Select VPN > SSL VPN from the menu. The SSL VPN submenu tabs display, with the
Policies screen in view.
2. Click the Portal Layouts submenu tab. The Portal Layout screen displays (see
page 6-5).
3. In the Portal URL column of the List of Layouts table, click a URL. The new SSL portal login
screen displays. (Figure 6-9 on page 6-24
portal layout as an example).
Virtual Private Networking Using SSL Connections
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
"Configuring Remote Management Access" on
6-4.
v1.0, April 2010
displays the previously created CustomerSupport
).
Figure 6-10 on page
Figure 6-1 on
6-23