NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 240

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Figure 7-7
3. In the User Login Policies section of the screen, make the following selections:
• To prohibit this user from logging in to the VPN firewall, select the Disable Login check
box.
• To prohibit this user from logging in from the WAN interface, select the Deny Login from
WAN Interface check box. In this case, the user can log in only from the LAN interface.
Note: For security reasons, the Deny Login from WAN Interface check box is
selected by default for guests and administrators. The Disable Login check
box is disabled (masked out) for administrators.
4. Click Apply to save your settings.
Configuring Login Restrictions Based on IP Address
To restrict logging in based on IP address:
1. Select Users > Users from the menu. The Users screen displays (see
2. In the Action column of the List of Users table, click the Policies table button for the user for
which you want to set login policies. The Policies submenu tabs display, with the Login
Policies screen in view.
3. Click the by Source IP Address submenu tab. The By Source IP Address screen displays.
Figure 7-8 on page 7-13
7-12
shows an IP address in the Defined Addresses table as an example.
Managing Users, Authentication, and Certificates
v1.0, April 2010
Figure 7-5 on page 7-9).