NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 173

Table 5-11. List of VPN Policies Information (continued)
Item
Auth
Encr
To delete one or more VPN polices:
1. Select the check box to the left of the policy that you want to delete, or click the Select All
table button to select all VPN policies.
2. Click the Delete table button.
To enable or disable one ore more VPN policies:
1. Select the check box to the left of the policy that you want to delete, or click the Select All
table button to select all IKE Policies.
2. Click the Enable or Disable table button.
For information about how to add or edit a VPN policy, see the next section,
Editing a VPN Policy."
Note: You cannot delete or edit an IKE policy for which the VPN policy is active. You
first must disable or delete the VPN policy before you can delete or edit the IKE
policy.
Manually Adding or Editing a VPN Policy
To manually add a VPN policy:
1. Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs display, with the IKE
Policies screen in view (see
2. Click the VPN Policies submenu tab. The VPN Policies screen displays (see
page 5-30).
3. Under the List of VPN Policies table, click the Add table button. The Add New VPN Policy
screen displays (see
Virtual Private Networking Using IPsec Connections
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Description (or Subfield and Description)
The authentication algorithm that is used for the VPN tunnel. This setting must
match the setting on the remote endpoint.
The encryption algorithm that is used for the VPN tunnel. This setting must
match the setting on the remote endpoint.
Figure 5-20 on page
Figure 5-23 on page
v1.0, April 2010
5-22).
5-32).
"Manually Adding or
Figure 5-22 on
5-31