NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 109

To delete or disable one or more rules:
1. Select the check box to the left of the rule that you want to delete or disable, or click the Select
All table button to select all rules.
2. Click one of the following table buttons:
• Disable. Disables the rule or rules. The "!" status icon changes from a green circle to a
gray circle, indicating that the selected rule or rules are disabled. (By default, when a rule
is added to the table, it is automatically enabled.)
• Delete. Deletes the selected rule or rules.
LAN DMZ Outbound Services Rules
You can change the default outbound policy or define rules that specify exceptions to the default
outbound policy. By adding custom rules, you can block or allow access based on the service or
application, source or destination IP addresses, and time of day. An outbound rule can block or
allow traffic between the DMZ and any internal LAN IP address according to the schedule created
in the Schedule screen.
To create a new outbound LAN DMZ service rule:
1. In the LAN DMZ Rules screen, click the Add table button under the Outbound Services table.
The Add LAN DMZ Outbound Service screen displays.
Figure 4-9
Firewall Protection
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
v1.0, April 2010
4-19