Other Event Logs; Session Limit Logs; Source Mac Filter Logs; Bandwidth Limit Logs - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

Gigabit quad wan ssl vpn firewall
Hide thumbs Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
Table of Contents

Advertisement

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual

Other Event Logs

This section describes the log messages generated by other events such source MAC filtering,
session limiting, and bandwidth limiting. For information about how to select these logs, see
"Activating Notification of Events, Alerts, and Syslogs" on page

Session Limit Logs

Table C-34. Other Event Logs: Session Limit Logs
Message
Explanation
Recommended Action Change the session limit to 2 to prevent packets from being dropped.

Source MAC Filter Logs

Table C-35. Other Event Logs: Source MAC Filter Logs
Message
Explanation
Recommended Action Disable source MAC filtering.

Bandwidth Limit Logs

Table C-36. Other Event Logs: Bandwidth Limit, Outbound Bandwidth Profile
Message
Explanation
Recommended Action Ensure that the packet size is within the specified bandwidth limit.
C-20
2000 Jan 1 06:53:33 [SRX5308] [kernel] SESS_LIMIT[DROP] IN=LAN OUT=WAN
SRC=192.168.11.2 DST=20.0.0.1 PROTO=TCP SPT=50709 DPT=21
When two FTP sessions are established from the same LAN host at IP address
192.168.11.2 and a session limit (SESS_LIMIT) is set as 1, the FTP packets from
the second session are dropped.
2000 Jan 1 06:40:10 [SRX5308] [kernel] SRC_MAC_MATCH[DROP] SRC MAC =
00:12:3f:34:41:14 IN=LAN OUT=WAN SRC=192.168.11.3 DST=209.85.153.103
PROTO=ICMP TYPE=8 CODE=0
Because MAC address 00:12:3f:34:41:14 of LAN host with IP address
192.168.11.3 is filtered so that it cannot access the Internet, the packets sent by
this MAC address to the Google server at address 09.85.153.103 are dropped.
2000 Jan 1 00:10:36 [SRX5308] [kernel] [BW_LIMIT_DROP] IN=LAN OUT=WAN
SRC=192.168.100.2 DST=22.0.0.2 PROTO=ICMP TYPE=144 CODE=145
TC_INDEX=10 CLASSID=10:5
This log is generated when an outbound packet is dropped because the packet size
exceeds the specified bandwidth limit.
v1.0, April 2010
9-5.
System Logs and Error Messages

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe srx5308

Table of Contents