NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 223

Table 6-5.
Add SSL VPN Policy
Item Description (or Subfield and Description)
Add SSL VPN Policies
Apply Select one of the following radio buttons to specify how the policy is applied:
Policy For • Network Resource. The policy is applied to a network resource that you have defined
on the Resources screen (see
page
Resource rows.
• IP Address. The policy is applied to a single IP address. The screen adjusts to display
the fields that are shown in the IP Address rows of this table.
• IP Network. The policy is applied to a network address. The screen adjusts to display
the fields that are shown in the IP Network rows of this table.
• All Addresses. The policy is applied to all addresses. The screen adjusts to display the
fields that are shown in the All Addresses rows of this table.
Network
Resource
IP Address
Virtual Private Networking Using SSL Connections
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Settings (continued)
6-14). The screen adjusts to display the fields that are shown in the Network
Policy Name A descriptive name of the SSL VPN policy for identification
and management purposes.
Defined From the drop-down list, select a network resource that you
Resources have defined on the Resources screen (see
Resource Objects to Simplify Policies" on page
Permission From the drop-down list, select whether the policy permits
(PERMIT) or denies (DENY) access.
Policy Name A descriptive name of the SSL VPN policy for identification
and management purposes.
IP Address The IP address to which the SSL VPN policy is applied.
Port Range / A port (enter in the Begin field) or a range of ports (enter in
Port Number the Begin and End fields) to which the SSL VPN policy is
applied. Ports can be 0 through 65535. The policy is applied
to all TCP and UDP traffic that passes on those ports. Leave
the fields blank to apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN policy is applied:
• VPN Tunnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
• All. The policy is applied both to a VPN tunnel and to port
Permission From the drop-down list, select whether the policy permits
(PERMIT) or denies (DENY) access.
v1.0, April 2010
"Using Network Resource Objects to Simplify Policies" on
forwarding.
forwarding.
"Using Network
6-14).
6-21