NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 28

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Note: The first time that you remotely connect to the VPN firewall with a browser via
an SSL connection, you might get a warning message regarding the SSL
certificate. Follow the directions of your browser to accept the SSL certificate.
3. In the Username field, type admin. Use lower-case letters.
4. In the Password / Passcode field, type password. Here, too, use lower-case letters.
Note: The VPN firewall user name and password are not the same as any user name
or password you might use to log in to your Internet connection.
5. In the Domain drop-down list, leave the default selection, which is geardomain.
6. Click Login. The Web Management Interface appears, displaying the Router Status screen.
(For information about this screen, see
page 9-10).
Figure 2-2
2-4
"Viewing the System (Router) Status and Statistics" on
Connecting the VPN Firewall to the Internet
v1.0, April 2010