NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 315
Gigabit quad wan ssl vpn firewall
Hide thumbs
Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
- Configuration manual (8 pages) ,
- Use manual (9 pages) ,
- Network setup manual (8 pages)
Table of Contents
Advertisement
Figure 10-1
The VPN firewall reboots. During the reboot process, the Settings Backup & Firmware Upgrade
screen might remain visible. The reboot process is complete after several minutes when the Test
LED on the front panel goes off.
Warning: When you push the hardware reset button or click the software Default
button, the VPN firewall settings are erased. All firewall rules, VPN policies,
LAN/WAN settings, and other settings are lost. Back up your settings if you
intend on using them.
Note: After rebooting with factory default settings, the VPN firewall's password is
password, and the LAN IP address is 192.168.1.1.
Troubleshooting and Using Online Support
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
v1.0, April 2010
10-9
Advertisement
Table of Contents
Troubleshooting
