NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 193

2. In the upper left of the Policy Editor window, click the New Connection icon (the first icon on
the left) to open a new connection. Give the new connection a name; in this example, we are
using ModeConfigTest.
Figure 5-28
3. Enter the settings as explained in
Table 5-17. Security Policy Editor: Remote Party, Mode Config Settings
Setting
Connection Security
ID Type
Subnet
Mask
Virtual Private Networking Using IPsec Connections
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Table
Description (or Subfield and Description)
Select the Secure radio button. If you want to connect manually only, select the
Only Connect Manually check box.
From the drop-down list, select IP Subnet.
Enter the LAN IP subnet address that you specified on the Add Mode Config
Record screen in the Local IP Address field. If you left the Local IP Address
field blank, enter the VPN firewall's default IP subnet address. In this example,
we are using 192.168.1.0.
Enter the LAN IP subnet mask that you specified on the Add Mode Config
Record screen in the Local Subnet Mask field. If you left the Local Subnet Mask
field blank, enter the VPN firewall's default IP subnet mask. In this example, we
are using 255.255.255.0.
v1.0, April 2010
5-17.
5-51